Rider Cargo Motorcycle Fork Brace

Point of contact is 10”

Measure the distance from the top of your tire to the bolts on the underside of you front fender. If it's under 10" get the mini. The large works great with my WR250, but is too tall for my YZ250.

Standard should be fine. It will squash your shocks a little, but that’s what keeps your straps tight.

for a KX 450 you need the standard size. these work great, I use them every time I haul my bike.

I would measure the fork travel . If it’s less than 10” from the tire to the bottom of the fender fork mount , get the smaller one. That would probably be the best choice

I am using the standard size on a CRF450X and a WR250F. Most of the time they just slide into place. 8f they don't I hold the front brake and pull backand tgt brings the fork to the top of its travel.

Since it is not over 10", you will want to get the mini.

I would measure the fork travel. If it’s less than 10” from the tire to the bottom of the fender fork mount, get the smaller one. If it is more than 10" you will want to get the standard.

Tip to tip it is 11 1/2 inches. From center U point to center U point it is 10 inches.

The standard fits any fork with 10 or more inches of travel.