You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
GPS
Zachary in NV
I installed this on my 2024 tenere 700. works great for my Zumo XT. The top cross bar does vibrate a bit, but not too bad. If you're using this for a GPS, the usb plug on the '24 T7 puts out 5V 2A. If you snip and solder a usb before the drop down, it works pretty well to charge the zumo xt. Install was pretty straight forward. I did use some blue loctite on the bolts once I figured out the correct angle and position.
Read All ReviewsJeff in OH
i live out in the middle of nowhere and it works way better than my phone. has definitely saved me many times. fitment was perfect for my norden 901 expedition and easy installation
Read All ReviewsCameron in TX
I will try to write this review as descriptive as possible. I bought this kit without any previous reviews or inquiring about it at all. As you may know, the newer factory edition GasGas and KTM bikes come with this Connectivity Unit (CU) and GPS preinstalled. I love that this is an add-on option, and for the price and about 20min to install, its a GREAT deal. The idea for this seemed to be a simple plug and play - connect to the devices app on your phone - and immediately be able to USE the product (tune the engine/track &analyze laps/and even help with suspension tuning In the description it does NOT mention anything about dealer service requirements. After spending a few hours not being able to connect to the device i reached out to Husqvarna and RMATVMC support and they were EXTREMELY helpful. The conclusion was that I was required to bring my bike (with the CU installed) to a Husqvarna dealer for them to update my engine control unit (ECU) and allow the CU to connect to the bike. After that it has worked flawlessly and im very pleased! I wish this were in the description because it IS in the CU manual. If you get this kit and dont have luck connecting just have it brought to a dealer and expect to pay a 1hr service fee. Great product though!
Read All ReviewsBrian in CO
The addition of the connectivity unit has been surprisingly effective. For me, the engine braking was too aggressive for my riding preference and I was able to dial it down. It was effective for the two hours I've spent on the bike. I had to the bike cpu updated at the dealer to complete the connection but since then I've had zero issues with connectivity. 2024 KTM 450 xc-f.
Read All ReviewsJaye in UT
Nice little camera, easy to install. The video quality seems good so far. I followed the instructions in the video and used a 3/4" drill bit then enlarged th hole a little with a Dremel tool. Be sure to route the wiring before plugging the two wires together. I forgot and getting the connector apart was a challenge.
Read All ReviewsWard in OH
Good construction, durable, fairly simple to use, holds Garmin unit tight. No issues with vibration causing to loosen.
Read All Reviews