Denali D3 LED Fog Light Kit with DialDim Lighting Controller

Details

At 14400 candela, the D3 Fog Light is the brightest street-legal fog light to pass both the SAE (North America) and ECE (European Union) fog light regulations. The unique Asymmetrical Optics were painstakingly engineered to achieve the maximum possible beam intensity in each of the regulated lighting zones.

• Pod Size: 3.5" (90mm) Round x 3" (76mm) Deep
• LED's: (4x) 2021 Cree XP-P
• Power Draw: 28 Watts (3.3 Amps)
• Lumens: 2800
• Max Candela: 14400
• Beam Distance (at 1ux): 395 Feet (120 meters)
• Beam Width (at 1ux): 250 Feet (76 meters)
• Certifications: SAE Compliant & ECE (E Mark) Certified
  
  The ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
  
  The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
• Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
• Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature.
• A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
• When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
• When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
• When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
• Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
• Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
• If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
  
  Includes:
  - (2x) D3 LED Fog Light Pod
  - (2x) Hinge Mounts with M8 Stainless Steel Hardware
  - (2x) Wiring Pigtail
  - (1x) DialDim Smart Controller