You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
Zachary in NV
I installed this on my 2024 tenere 700. works great for my Zumo XT. The top cross bar does vibrate a bit, but not too bad. If you're using this for a GPS, the usb plug on the '24 T7 puts out 5V 2A. If you snip and solder a usb before the drop down, it works pretty well to charge the zumo xt. Install was pretty straight forward. I did use some blue loctite on the bolts once I figured out the correct angle and position.
Read All ReviewsDean in GA
So much easier to use now that trip planning can be done in the Tread app instead of Basecamp.
Read All ReviewsBrian in CO
The addition of the connectivity unit has been surprisingly effective. For me, the engine braking was too aggressive for my riding preference and I was able to dial it down. It was effective for the two hours I've spent on the bike. I had to the bike cpu updated at the dealer to complete the connection but since then I've had zero issues with connectivity. 2024 KTM 450 xc-f.
Read All ReviewsJaye in UT
Nice little camera, easy to install. The video quality seems good so far. I followed the instructions in the video and used a 3/4" drill bit then enlarged th hole a little with a Dremel tool. Be sure to route the wiring before plugging the two wires together. I forgot and getting the connector apart was a challenge.
Read All ReviewsWard in OH
Good construction, durable, fairly simple to use, holds Garmin unit tight. No issues with vibration causing to loosen.
Read All ReviewsPeter in AZ
Fitted easily. The phone can be mounted either portrait or landscape. Would recommend this as a secure option for my expensive phone.
Read All Reviews